SK Series Plugs

Click to enlarge
Pull/Expand principle. The installation tool maintains sleeve position in the hole while pulling the mandrel into and expanding the sleeve until the mandrel breaks off at a predetermined point. Anchorage is achieved by the serrations on the outside of the sleeve anchoring into the base material, especially in soft material.
  • 4-10 mm diameter, Extended mandrels for below surface installation
  • Working pressure to 500 Bar (7,250 psi)
  • Shorter Installed Length
  • Larger working tolerances 0/+0.12 mm
  • Installs directly into drilled holes
  • Clean mechanical sealing through positive anchoring
  • Quick installation using handy rivet type tools