Click to enlarge

Ball-Stud Receiver #136537

[C01663-012 Legacy]

Ball-Stud Speed Clips

Ball-Stud Speed Clips were originally developed as spring catch fasteners on aircraft access doors, inspection panels, sealing strips and other similar assemblies requiring repeated disengagement. Their versatility soon found ball studs used extensively in other fields where they secured kitchen cabinet doors, removable toe plates, electronic cabinets, protective covers, etc. There is no direct contact between the ball stud and panel surfaces. This eliminates wear or chipping of painted or porcelained surfaces and resulting corrosion. When latched, the spring legs of the Speed Clip continually bear inward on the spherical or serrated studs, holding the latched unit snug against the panel.

Where adjustability or wide latching ranges are required, the serrated ball stud is used. They are mainly used for attaching compressionable materials such as rubber, fabric, insulation, etc.

Pull-out tensions, depending on the material thickness of the Speed Clip and the stud used, can be provided from 3.5 pounds to 50-65 pounds. Various panel thicknesses are accommodated by arying the stud lengths.


 

Specifications
Hole Diameter (H) 0.135
Design Variation Std.
Stud Type (Pull Out Tension) 3.5 lbs.
Ball Serrated (Pull Out Tension) 5 lbs.
Length (A) 0.97
Width (b) 0.44
Center to Center (C) 0.685
Height (E) 0.22
Material Spring Steel
Mounting Hole Diameter 0.135
Material Thickness (s) 0.012
0
Quantity:
Join Our Email List
Email:  
SafeSubscribe Label

Our website uses cookies. For more information on our cookie use, see our Privacy Policy. By continuing to use this website you agree to our use of these cookies.