Bolt Products is proud to represent the following OEMs. These manufacturers represent a full range of fastener products and Bolt Products is knowledgeable about their standard product lines and custom solutions. See the full list of OEMs below.
Authorized Fastener Distributor - Avery Dennison
Fastener Division of Avery Dennison, is a recognized leader in producing products, mostly cable ties that mark, decorate, identify, organize and fasten. Avery Dennisons quality system exceeds industry standards set by ISO/QS, UL (Underwriters Laboratories, Inc.) and Military Specifications.
Avery-Dennison

 

Authorized Fastener Distributor - Bowes Manufacturing
  Bowes Push-on Cap Nut Fasteners provide an attractive and secure means of capping exposed shaft, axle or stud ends. Bowes Cap Nuts are available in four different cap nut designs that are all easy to install. All our cap nut fasteners can be painted to match the color of your products for decorative purposes.
  SAMPLE REQUEST

  Bowes Authorized Fastener Distributor

Authorized Fastener Distributor - DOT / Scovill Fasteners
Dot Fasteners
DOT / Scovill Fasteners the number one choice of the world's leading marine and industrial product manufacturers for heavy duty caps, eyelets, grommets, studs, posts, sockets, prongs, Speedy Rivets, Segma fasteners, Positive locking fasteners, windshield clips, gypsy studs and screw studs. Bolt Products provides a wide variety of DOT / Scovill fasteners.


 

Authorized Fastener Distributor - Hellermann Tyton
HellermannTyton is a global manufacturer who offers high performance fastening, connecting, routing, protecting, and identifying solutions to diverse markets. HellermannTyton is registered to the QS-9000 (including ISO 9001) and ISO14001 standards.
Hellermann
 
Authorized Fastener Distributor - Heyco Products
Heyco Products The Heyco Product line offers a complete line of strain relief, wire routing and termination, and electrical products. This is complimented by a complete line of hole plugs and specialty fastening products.
  thumb_heyco2
 
Authorized Fastener Distributor - Inserts International
Insert International is a leading manufacturer of Standard Inserts, Metric Inserts, Custom Inserts, and Colored Inserts. Inserts are available in different colors, materials, and plating finishes.
Inserts International
 
Authorized Fastener Distributor - KMC
KMC stampings KMC stampings offer a full range of standard Clamps, Clips and Plugs and complete custom Clamps, Clips and Plugs using engineering expertise, tooling experience and prototypes.
 
Authorized Fastener Distributor - Lyn-Tron, Inc.
Lyn-Tron, Inc. Is a fine manufacturer of screw machined products providing the most comprehensive assortment of electronic hardware. Spacers, standoffs, swage products and tooling, captive screws and nuts, and handles are available in practically any material and finish.
thumb_lyn
 
Authorized Fastener Distributor - Marson & Gesipa Fasteners
Marson & Gesipa Fasteners USA, Inc.
Marson & Gesipa Fasteners Provide blind, structural, and multi-grip rivet products. Our rivets are competitively priced and provide the largest selection of standard, semi-standard, and special rivets in the Wholesale Fastener industry. If you need a carton of rivets or a million Marson & Gesipa Fasteners, Bolt Products Inc. will provide the answer.
marson_gesipa
 
Authorized Fastener Distributor - Rivet King® Fasteners
The known leader in standard and specialty blind fastening products. Quality rivets conform to TS-16949 manufacturing standards and ISO 9001:2000. A full range of rivets is available : QuickRivets™, Blind Rivets and Rivet Nuts, Standard Rivets, Open End Rivets, Closed End Rivets made from choice of aluminum or stainless steel.
rivet king
 
Authorized Fastener Distributor - Rotor Clip
Rotorclip Rings are the wholesale fastener of choice among OEM engineers worldwide. They simplify design and lower installation cost. They also replace traditional wholesale fasteners like shoulder screws, screws, nuts, and cotter pins.
  thumb_rotor
 
Authorized Fastener Distributor - Sherex Fasteners
sherexdisclock Sherex Products are used for sealing fluid power passages, at 0PPM. Sherex manufacture the SAE plug under the strict SAE J514 standard, port plugs for sealing threaded holes. Sherex also offer a full range of standard and specialty brass inserts, blind fastening products and blind rivet nuts, fastener installation tools and Vibrational Loosening Prevention Locking Technology
 
Authorized Fastener Distributor - Tinnerman Palnut Products, Inc.
Tinnerman Engineered TransTechnology Engineered Wholesale Fastener Division: The Tinnerman and Palnut product lines feature the world’s largest selection of spring steel, stainless steel and plastic engineered wholesale fasteners. Choose from over 15,000 or let us design a custom clip, spring or retainer to meet your needs.
thumb_tinnerman

Our website uses cookies. For more information on our cookie use, see our Privacy Policy. By continuing to use this website you agree to our use of these cookies.