Heyco Products

Liquid Tight Tubing, Electrical Conduits & Nylon Conduit Fittings
Right Angle Fittings PG | Right Angle Fittings NPT | Flex I-Fittings | Flex II-Tubings | Flex V-Slit Tubing | FlexNylon Snap-In | FlexNylon Straight | FlexNylon Sweep | Flex III Halogen Free Straight | Flex IV Nylon Straight/Snap-In | Flex Mounting Brackets/Knock-Out Seals | Sealing Washers | Liquid Tight Straight-Thru Fittings | Liquid Tight Straight-Thru Fittings For Flexible Cords | Liquid Tight Pigtail Fittings | Liquid Tight Pigtail Fittings For Flexible Cords | Steel Straight Connectors - PG Thread Caps | Metal Cord Grip Fittings | PG Hub Liquid Tight Fittings - Labkit | Straight Quick Twist Connector (snap and NPT threaded) |
Sweep Quick Twist Connector (snap and NPT threaded)

Nylon and Metal Locknuts & Sealing Washers

Heyco® Sealing Washers

Heyco Sealing Washer Sealing Washer front Sealing Washer from side
Swipe
Will Fit These Electrical
Sizes-NPT

Part No.

UL/CSA
Description
A
Inside
Diameter
in.            mm.
B
Outside
Diameter
in.              mm.
C
Thickness

in.          mm.
1/4 3258 SW 1/4 .540        13,7 .796           20,2 .125        3,2
1/2 3260 SW 1/2 .840        21,3 1.203         30,6 .125        3,2
3/4 3261 SW 3/4 1.030      26,2 1.500         38,1 .135        3,4
1 3262 SW 1 1.315      33,4 1.750         44,4 .135        3,4
 
Standard Sealing Washer Color:  Black
  • For use with most electrical fittings.
  • Liquid tight, dust tight and oil tight at enclosure.
  • Suitable for wet locations requiring a separate gasket between the box and fitting.
  • Also suitable for other panel or chassis sealing applications.
  • Easy to install since washers seal off on the perimeter, not on the connector threads.
  • Special double sealing ridges compensate for minor unevenness at enclosure.
  • Molded of Santoprene 251-80; flammability classification 94V-0.

LN- Metal Locknuts

Swipe
  Stamped Steel Zinc Die-Cast
  LN- Metal Locknuts - Stamped Steel LN- Metal Locknuts - Zinc Die-Cast
Trade Size Part No. Description Part No. Description
1/2" 2250 LN 1/2 9800 LN 1/2 DC
3/4" 2251 LN 3/4 9801 LN 3/4 DC
1" 2252 LN 1 9802 LN 1 DC
 

Heyco® Nylon Locknuts



Page1-13-3.jpg (3202 bytes)
  • Heyco nylon locknuts are molded of type 6/6 nylon. ASTM D-4066-82; flammability classification 94V-2; temperature index 125°C.
Swipe
Thread Type
and Size
Black Gray Description G
Thickness
in.          mm.
H
Wrenching Flats
in.        mm.
3/8 NPT 8461 8462 NLN 3/8 NPT .265        6,7 1.058     26,9
1/2 NPT 8463 8464 NLN 1/2 NPT .265        6,7 1.058     26,9
3/4 NPT 8465 8466 NLN 3/4 NPT .265        6,7 1.312     33,3
1 NPT 8467 8468 NLN 1 NPT .265   &