"Quick Twist" Connector Straight Snap-In
Liquid Tight Tubing, Electrical Conduits & Nylon Conduit Fittings |
"Quick Twist" Connector Straight Snap-In
Fits Conduit/Tubing Trade Size | Part No. | Description | A | B | C | D | E | ||||||
Black | Gray | Mtg. Hole Dia. | Overall Length | Body Length | Wrenching Nut Thickness | Wrenching Flats | |||||||
1/4 | 8515 | 8516 | HFC 1/4-S twist | .540 | 13,7 | 1.33 | 33,8 | .344 | 8,7 | .090 | 2,3 | .750 | 19,0 |
3/8 | 8485 | 8486 | HFC 3/8-S-twist | .875 | 22,2 | 1.376 | 35,0 | .391 | 9,9 | .090 | 2,3 | 1.000 | 25,4 |
1/2 | 8490 | 8491 | HFC 1/2-S-twist | .875 | 22,2 | 1.376 | 35,0 | .391 | 9,9 | .090 | 2,3 | 1.000 | 25,4 |
3/4 | 8495 | 8496 | HFC 3/4-S-twist | 1.093 | 27,8 | 1.495 | 38,0 | .390 | 9,9 | .090 | 2,3 | 1.250 | 31,8 |
- Low cost electrical nylon fastener in nylon fastener sizes (1/4", 3/8", 1/2", 3/4"). Approved for use with Heyco Flex II nylon tubing.
- One-piece solution with smooth internal surfaces provides for easier wire routing, protection and installation.
- All nylon construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
- Easy, permanent nylon fastener assembly: the installer "twists" the tubing over the ferrule until the tubing "clicks" into place. It's that easy!
- No tools needed for installation.
- Unique nylon fastener locking fingers accommodate various chassis thicknesses.
- See below for Quick Specs.
- Nylon fastener is suitable for a wide array of electrical applications:
- Commercial and Industrial HVAC Systems
- Motorized Equipment
- Enclosed Power Sources
- Garage Door Openers
- Major Appliances Molded of 6/6 nylon.
- UL listed. File #E-121095
- Flammability Rating--94V-2
- Temperature Index--125°C
"Quick Twist" Nylon Fastener/Connector Straight-NPT Threaded
Fits Conduit/Tubing Trade Size | Part No. | Description | A | B | C | D | E | ||||||
Black | Gray | Mtg. Hole Dia. | Overall Length | Body Length | Wrenching Nut Thickness | Wrenching Flats | |||||||
1/4 | 8517 | 8518 | HFC 1/4 NPT-twist | .540 | 13,7 | 1.56 | 39,6 | .465 | 11,8 | .200 | 5,1 | .750 | 19,0 |
3/8 | 8487 | 8488 | HFC 3/8 NPT-twist | .875 | 22,2 | 1.720 | 43,7 | .625 | 15,9 | .200 | 5,1 | 1.180 | 30,0 |
1/2 | 8492 | 8493 | HFC 1/2 NPT-twist | .875 | 22,2 | 1.720 | 43,7 | .625 | 15,9 | .200 | 5,1 | 1.180 | 30,0 |
3/4 | 8497 | 8498 | HFC 3/4 NPT-twist | 1.109 | 28,2 | 1.840 | 46,7 | .625 | 15,9 | .200 | 5,1 | 1.370 | 34,8 |
Locknuts are NOT included.
* Low cost electrical connector in four sizes (1/4", 3/8", 1/2", 3/4"). Approved for use with Heyco Flex II Tubing. See pg. 1-2.
* One-piece solution with smooth internal surfaces provides for easier wire routing, protection and installation.
* All nylon construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
* Easy, permanent assembly: the installer "twists" the tubing over the connector ferrule until the tubing "clicks" into place.
It's that easy!
* No tools needed for installation.
* Unique locking fingers accommodate various chassis thicknesses.
* See below for Quick Specs.
* Suitable for a wide array of electrical applications:
---Commercial and Industrial HVAC Systems
---Motorized Equipment
---Enclosed Power Sources
---Garage Door Openers
---Major Appliances
Molded of 6/6 nylon.
UL listed. File #E-121095
Flammability Rating--94V-2
Temperature Index--125°C
Part Look up |
|