Grate Clips, Saddle Clips - Series SC
Saddle Clips for Anchoring Grating (Grate Clips)
Saddle clips are made for use with welded steel and pressure-locked aluminum or steel grating with bearing bars at 15/16” (0.937 mm) and 1-3/16” (1.188 mm) centers. Anchoring saddle clips may be used on installations where grating is frequently removed and replaced. Steel saddle clips used on aluminum should be galvanized or zinc plated.
Use grate clips for welded steel and pressure-locked aluminum or steel grating having bearing bars at 15/16" (.937) and 1-3/16" (1.188) centers. May be used on installations where grating is subject to frequent removal. Steel clips used on aluminum should be galvanized clips or zinc plated. Bolt holes may be distorted by forming, but .281" diameter pin will pass through .312" hole, and .328" diameter pin will pass through .343" hole.
Download PDF data sheet (217KB) Saddle Clips drawings and specifications
- ISO/TS 16949:2009 and ISO 9001:2008 - ANSI/ISO/ASQ Q9001-2008
- Finishes include Galvanized Steel, Commercial Zinc Plate and None (Plain)
- Materials: C.R. Steel, Aluminum, Stainless Steel