Latch-Type Speed Nuts® can be quickly and easily snapped into center-panel locations for blind assembly attachments. They are self-retained in a screw- or bolt-receiving position requiring no welding, clinching, or riveting. The latching principle is easily incorporated into other fastening designs to provide attachment of cables, wires, molding, angle brackets, spring catches and other center-panel-located fasteners.

How to apply Latch-Type Speed Nuts

Place Speed Nut over clearance holes in panel.

Insert “toe” in hole and press forward until “heel” catches.

To remove, slide tool under Speed Nut to release “heel”, then press back until “toe” disengages.

“Special” offset latches attach to panel by inserting prong end through rectangular hole.

Then insert assembly tool in round hole to drift Speed Nut into bolt-receiving position. The Speed Nut self=seals the rectangular panel hole.