Engineered Fastening Solutions, Fasteners, Cable Ties, Distributor Standard

Structural Products

U and J Type Nut Retainers

U-Type Nut Retainers offer the same advantages as the J-Type Nut Retainers. That is, heavy-duty fastening, low fastener profile, "float" for hole misalignment, self-retention and blind location fastening. With the full-sized lower leg, the U-Type Nut Retainer is preferred where a full bearing surface between the panels is desired. They are applied simply and quickly in center, or end-panel locations requiring no special skills or equipment.

U-Type Nut Retainers Material:
All parts are Spring Steel, heat treated, unless otherwise specified. The only variations available are those shown with suffix letters in the part number.

SS - Stainless Steel
BE - Beryllium Copper
P - Phosphor Bronze

The dimensions of the parts listed are envelope dimensions only. For complete design information, please request a blueprint from your Tinnerman Palnut representative or the Tinnerman Palnut Engineering Department.

Metric parts listed in italic

Part Number	Screw Size	Design	P Panel Min	P Panel Max	A Length	B Width	C Max Ctr Hold to Edge	X Ctr to End	G Panel Hole
C34121-M10	M10 x 1.50	U	4.25	5.00	34.50	24.00	16.90	17.60	14.00
D99084-M8125	M8-1.25	U	14.50	15.00	29.50	16.00	19.50	8.00	10.90
D98957-M8125	M8-1.25	U	3.00	3.00	35.80	25.00	19.00	16.80	14.05
D98774-030M	M8 x 1.25	U	3.20	3.70	29.50	21.05	14.50	15.00	11.00
D99026-3816	3/8-16	U	14.50	15.50	29.50	16.00	19.50	21.50	10.90
C30584-3816	3/8-16	J	4.83	5.33	38.86	22.73	22.86	12.83	14.27
C30664-3816	3/8-16	J	2.74	3.25	39.62	22.73	22.86	12.83	15.88
C31280-3816	3/8-16	J	2.36	5.16	38.10	19.05	19.05	11.18	11.10
C33896-3816	3/8-16	J	2.29	3.56	26.29	19.05	12.70	11.68	12.80
C33952-3816	3/8-16	J	1.27	2.29	26.67	19.05	13.87	11.68	12.80
C33953-3816	3/8-16	J	3.23	4.14	25.40	19.05	12.70	10.67	11.10
C34121-M10	M10 x 1.50	U	4.25	5.00	34.50	24.00	16.90	17.60	14.00
LPGS085725	M8 x 1.25	U	1.50	5.50	24.89	17.02	13.00	10.41	11.70
LPGS100033	M10-1.50	U	1.50	5.50	33.50	24.0	18.50	14.00	14.20
LPGZ002264	M10-1.50	U	1.50	5.50	31.00	24.00	18.50	14.00	14.20
LPGZ106033	M10 x 1.50	U	3.0	6.00	32.50	23.90	18.50	14.00
LUGS080025	M8 x 1.25	U	.80	4.00	24.89	17.02	13.00	10.41	11.70
LUGS085725	M8 x 1.25	U	1.50	5.50	24.89	17.02	13.00	10.41	11.70
LUGS085725	M10 x 1.50	U	1.50	5.50	32.50	17.50	18.50	14.00	14.20
D98397S-M1015	M10 x 1.50	U	1.30	1.75	30.50	24.00	13.00	17.50	14.00
LUGS381683	3/8-16	U	1.27	5.08	32.77	23.62	16.76	14.22	14.27
D99177-M1015	M10 x 1.50	U	14.50	15.50	29.80	16.00	19.50	8.50	11.00
D99131-157M	M12 x 1.75	U	3.25	3.75	41.00	36.00	18.00	23.00	11.00