|
Bolt Retainers & Mounting Clips
Tinnerman rear mounting Bolt Retainers eliminate problems of blind
location, bolt retention, threaded stud damage, paint-clogged
threads, weld flash and difficult assembly or removability
wherever threaded studs may be used. Mounting clips can be attached
after finishing and just before final assembly to eliminate
thread damage due to stacking, weld flash, paint clogging,
etc. One type is mounted from the front to ease assembly in
blind or difficult locations. Both are self-retained and can
be easily removed and replaced without damage to the mounting
panel. Access to the underside of the panel is unnecesary
because the bolt cannot turn as the nut is driven to its prescribed
torque. A shallow emboss allows flush mounting of mating panels.
How to apply rear mounting Bolt Retainer mounting clips
Hold the thread bolt between the thumb and forefinger. Tip
the retainer into the mounting hole allowing the wing-like
spring legs to rest on the panel. Allowing the wing-like spring
legs to rest on the panel. Apply a rearward pressure on the
top panel side of the bolt until the embossed shear snaps
into the panel hole locking the Bolt
Retainer in position.
The dimensions of the parts listed are envelope dimensions
only. For complete design information on Bolt retainer mounting clips, please request a blueprint
from your Tinnerman Palnut representative or the Tinnerman
Palnut Engineering Department.
Metric parts listed in italic
|
REQUEST A CD
HELP ME CHOOSE
SAMPLE REQUEST
eVIP WAREHOUSE 
VIEW CART
CAD DRAWINGS
CONVERSIONS
SURVEY 
SITE MAP