Self-Anchoring Nut Retainers

Tinnerman® Self-Anchoring Nut Retainers offer the same advantages as the preceding Nut Retainers; i.e., high strength, easy to apply for blind fastening locations, self-retention, etc. In addition, this variety provides a unique feature which firmly locks the fastener in the panel, distributing the driving torque through the surround panel area. This is accomplished with a T-shaped capative nut, cleverly devised locking tabs, and mounting legs. It cannot be accidentally dislodged even with excessively rough handling. However, should thread damage occur due to cross-threading or over torquing, it can be deliberately removed without damage to panel or finish. Self-Anchoring Nut Retainers are recommended for applications where fasteners with less permanent retention are apt to be lost due to stacking butting or rough handling of panels on the production line.

How to apply Self- Anchoring Nut Retainers

Self-Anchoring Nut Retainers are set into the panel-mounting hole after the finishing process. The spring steel mounting legs temporarily hold the fastener in place as

… The T-nut is pressed into locked position in the panel. As the T-nut expands the mounting legs around the panel, it forces past spring tab provided in the retainer which snap back locking the fastener firmly, permanently in the panel.

• SS - Stainless Steel
• BE - Beryllium Copper
• P - Phosphor Bronze