ATTN: EDITOR FOR IMMEDIATE RELEASE Wednesday, November 11, 2009
SUBJECT: Bolt Products Inc to provide new large diameter fasteners for wind turbines for the green energy wind industry

Bolt Products now supplies large diameter wind turbine fasteners for assembly, transportation, construction and maintenance of wind turbines. The rapidly expanding green energy wind industry has high demand of specialty wind turbine fasteners required to manufacture the latest wind turbines.

The distinctive three-blade wind turbine can weigh up to 164 tons and requires approximately 25,000 fasteners. Bolt Products Inc manages a complete solution starting with the exact documentation required and delivers the fasteners required for this complex wind turbine assembly. The wind turbines assemblies require unique fasteners and fastener application engineering. Specialty fasteners are required for wind turbine high stress applications and intense vibration that exist during operation.

Bolt Products has partnerships with pre-qualified and audited suppliers to source the correct combination of structural fasteners required for green energy wind turbines. Gary Cornell, Vice president of sales noted that “typical large nut and washer diameter sizes M30-M42 are required in wind turbines and are not easily and reliably” sourced.

Bolt Products offers complete product, process and material traceability. With its warehouses in the Midwest and West Coast, Bolt Products offers excellent sourcing and logistics expertise as well as custom crating, kitting and packaging. Bolt Products experienced engineering staff are extremely well versed in dealing with nut and washers and ISO Standards specific to wind turbine technology.  Bolt Products provides wind industry nuts, wind turbine bolts, wind turbine fasteners, wind turbine nuts, and wind turbine washers.

More information on the full range of fasteners for all industries and applications can be found on www.boltproducts.com. All other sales inquiries and requests for engineering support should be directed to (800) 423-6503.

About Bolt Products Inc
Bolt Products Inc is a wholesale fastener distributor and authorized supplier of KMC stampings, Rivet King, Tinnerman Palnut Fasteners, Heyco, Inserts International, DOT / Scovill, Lyn-Tron, Gesipa, RotorClip, Hellermann Tyton, Marson, Sherex, and Avery Dennison fasteners. Bolt Products offers custom engineered fastening solutions and a full range of Standard and Metric fasteners at wholesale prices.

Bolt Products Inc is ISO 9001 registered and its supply chain conforms to RoHS and WEEE directives.  Bolt Products distributes throughout the USA as well as globally. Bolt Products has Distribution warehouses in California and Iowa.

For more information, please contact Bolt Products Inc at 800 423 6503 or visit www.boltproducts.com or email sales@boltproducts.com, contact Gary Cornell.

ATTN: EDITOR FOR IMMEDIATE RELEASE July 28, 2009

SUBJECT: Bolt Products Inc to provide new fastener warehouse distribution facility in Iowa.

Bolt Products Inc recently added a new fastener warehouse distribution facility in Iowa to reduce shipping times and reduce freight costs to its midwest and east coast clients.

The fastener warehouse shipping address is located in Iowa to provide a central USA location

All wholesale fastener orders are still processed through the California-based Head Office or the website www.boltproducts.com.

Gary Cornell, Sales Vice president commented, "This is a significant expansion of our distribution capabilities that will save our midwest and east coast client money and provide local stock of common fasteners."

The new fastener distribution facility will also be supported by experienced local sales and engineering support staff, William Covington, who can be contacted directly 515-223-9014.

More information on the full range of fasteners for all industries and applications can be found on www.boltproducts.com. All other sales inquiries and requests for engineering support should be directed to 800-423-6503.

About Bolt Products Inc
Bolt Products Inc is a wholesale fastener distributor and authorized supplier of KMC stampings, Rivet King, Tinnerman Palnut Fasteners, Heyco, Inserts International, DOT / Scovill, Lyn-Tron, Gesipa, RotorClip, Hellermann Tyton, Marson, Sherex, and Avery Dennison fasteners. Bolt Products Inc offers custom engineered fastening solutions and a full range of Standard and Metric fasteners at wholesale prices.

Bolt Products Inc is ISO 9001 registered and its supply chain conforms to RoHS and WEEE directives. Bolt Products distributes throughout the USA as well as globally. Bolt Products has distribution warehouses in California and Iowa.

For more information, please contact Bolt Products at 800-423-6503, visit the website at www.boltproducts.com or email sales@boltproducts.com contact Gary Cornell.

SUBJECT: Bolt Products Inc to distribute new Heyco ERTB high-current terminal blocks

Wednesday, May 16, 2007

Bolt Products an authorized distributor for Heyco Products, Inc., is helping to promote and distribute the new ERTB Terminal Blocks for all high current draw and aluminum wire applications. HEYCO especially designed and manufactured this new precision-molded wire-protection product using stamped metal electrical components, for OEM line-voltage power transmission to various electrical equipment.

The three-pole ERTB Terminal Blocks provides secure, reliable points of connection and transmission for incoming power line service to electrical equipment of many kinds, whilst providing a minimal footprint. The ERTB terminal Block is especially suited for high-capacity standard copper listed or new UL-aluminum wire connections in consumer or commercial appliances, such as electric ranges, washers and dryers; electric water heaters, heat pumps, power generators, HVAC equipment, machinery, and other applications that require high-current copper or aluminum wire hookups.

The ERTB Terminal Blocks are compact, sturdy post-to-clamp style unitized blocks that mount to any cabinet or housing attachment point. Each of these electrical poles has a protective strip under each tightening screw that does not pierce either copper-wire strands or softer aluminum wire, holding both equally tight. Where aluminum wire is used, it needs minimal torque at installation, to remain secure without working loose from current-induced expansion and contraction.

Each low-profile terminal block has a single row, three-wire pole design that accommodates line voltage on one or two poles, handling neutral and ground wires on the one or two remaining poles. Poles accept 6-4 AWG aluminum wire, or 10-6 AWG copper stranded wire rated to 300 volts, 60 amps. Low installation torqueing for “hot” leads allows reliable connections to be made quickly, easily, and resist loosening during operation. A solid-copper grounding strap on the center pole assures safety.

ERTB Terminal Blocks are molded in of impact-resistant polycarbonate with a flammability classification of 94V-O and a temperature rating of 125° Celsius. ERTB Terminal Blocks are UL recognized under component file #E235481, and certified by the Canadian Standards Association, File #LR-8919.

Mr Cornell, Vice President of sales felt that “there was a good demand in the market place for this kind of quality high current terminal block in the latest state of the art electrical applications.“ More information on the ERTB high current terminal block and full range of Heyco products can be found on www.boltproducts.com

Bolt Products is an authorized distributor of Tinnerman Palnut Fasteners, Heyco, DOT / Scovill, Lyn-Tron, Gesipa, RotorClip, Hellerman Tyton, Marson, Sherex, and Avery Dennison fasteners. Bolt Products offers custom engineered fastening solutions and a full range of Standard and Metric fasteners at wholesale prices.

Bolt Products is ISO 9001 registered and its supply chain conforms to European RoHS and WEEE directives. Bolt Products distributes throughout the USA as well as globally.

For more information, please contact Bolt Products at 800 423 6503 or visit www.boltproducts.com or email sales@boltproducts.com, contact Gary Cornell.

Bolt Products Inc to distribute DOT Eyelets Scovill Fastening Solutions in California

Wednesday, March 28, 2007

In March 2007 Bolt Products Inc successfully concluded a new marketing agreement to represent Scovill Fastening Solutions in California. As a distributor Bolt Products was looking for a high quality eyelet fastening solution, an OEM, like DOT / Scovill that it can add to its supply chain that is RoHS compliant. DOT / Scovill eyelets are high strength, heavy-duty construction, uniform in size, and have tight tolerances.

Bolt Products has worked with DOT / Scovill marketing staff to ensure the DOT/Scovill content was quickly and easily posted on the Bolt Products site to get visibility in front of its extensive customer base. This partnership will greatly increase DOT/ Scovill visibility on the Internet search engines and is further leveraged by Bolt Products extensive knowledge of advanced user interfaces and Search Engine Part Number Optimization.

Bolt Products feels positive about adding the DOT/ Scovill eyelets Fastening Solutions to its product offerings, which are used for Awnings, Sporting Goods, Marine, Military, Tents, Protective Gear Garments, and Packaging.

More information on DOT / Scovill eyelets and Fasteners and other fastener products can be found on www.boltproducts.com

About Bolt Products

Bolt Products is an authorized distributor of Tinnerman Palnut Fasteners, Heyco, DOT / Scovill, Lyn-Tron, Gesipa, RotorClip, Hellerman Tyton, Marson, Sherex, and Avery Dennison fasteners. Bolt Products offers custom engineered fastening solutions and a full range of Standard and Metric fasteners at wholesale prices.

Bolt Products is ISO 9001 registered and its supply chain conforms to European RoHS and WEEE directives. Bolt Products distributes throughout the USA as well as globally.

For more information, please contact Bolt Products at 800 423 6503 or visit www.boltproducts.com or email sales@boltproducts.com, contact Gary Cornell.