Enter Part Number
 
Help Me Choose
Join Our Email List
Email:  
Download PDF of this page  Print this page
 

HFC 1/2-90R BLACKw/8463 NUT

[8425]

For Flexible, Nonmetallic Liquid Tight Conduit and Tubing

Foreign Patents

  • Sizes 3/8 thru 2" for use with Heyco-Flex Conduit and Tubing.
  • Smooth internal surfaces for easier wire installation around corner angles.
  • Resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL certification and testing.
  • No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut. This completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
  • No threading of the conduit or tubing is required to install. This eliminates the possibility of cutting the conduit and creating leak paths.
  • Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
  • Suitable for indoor/outdoor use; for original equipment manufacturers or field installers.
  • Lower installed cost.
  • Protection class IP 68 up to 70 psi (5 bar) water pressure.
  • Black connectors provided with nylon locknut, packed separately.
  • Use of a sealing washer may be required for wet locations.
  • Gray connectors provided with assembled O-ring and metal locknut.
UL and CSA Approved."
Specifications:
Color:Black
Conduit/Tubing Trade Size:1/2
Description:HFC 1/2-90R
Thread Size:3/4 NPT
Clearance Hole - A [inches]:0.875
Clearance Hole - A [mm]:22.2
Max. O. A. Height - B [inches]:1.98
Max. O. A. Height - B [mm]:50.3
Max. O. A. Length - C [inches]:2.91
Max. O. A. Length - C [mm]:73.9
Thread Length - D [inches]:0.52
Thread Length - D [mm]:13.2
Material:6/6 Nylon
Certifications:Listed under Underwriters' Laboratories File #E-28430
Certified by Canadian Standards Association File #LL-84579 and #LR-81067
Material Temperature Index:125ºC - Maximum temperature on the part shall not exceed 105ºC
 
  Quantity Required:
 
   
 

Privacy Policy | View all Tinnerman Parts | View all Heyco Parts | View all DOT/Scovill Parts | View all Sherex Parts | View all HellermannTyton Parts | Sitemap

Site Credits: Ecreativeworks