|
"Quick Twist" Connector Sweep Snap-In |
|
|
Fits Conduit/Tubing Trade Size |
Part No. |
Description |
A |
B |
C |
D |
E |
|
Black |
Gray |
Mtg. Hole Dia. |
Overall O.A. Height |
Max. Overall Length |
Body Length |
Flange Dia. |
|
3/8 |
8500 |
8501 |
HFC 3/8-S-90 twist |
.875 |
22,2 |
1.754 |
44,6 |
2.749 |
69,8 |
.390 |
9,9 |
1.230 |
31,2 |
|
1/2 |
8505 |
8506 |
HFC 1/2-S-90 twist |
.875 |
22,2 |
1.754 |
44,6 |
2.749 |
69,8 |
.390 |
9,9 |
1.230 |
31,2 |
|
3/4 |
8510 |
8511 |
HFC 3/4-S-90 twist |
1.093 |
27,8 |
1.965 |
50,0 |
3.081 |
78,3 |
.390 |
9,9 |
1.500 |
38,1 |
|
* Low cost electrical connector in three sizes (3/8", 1/2", 3/4"). Approved for use with Heyco Flex II Tubing. See pg. 1-2.
* One-piece solution with smooth internal surfaces provides for easier wire routing, protection and installation.
* All nylon construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
* Easy, permanent assembly: the installer "twists" the tubing over the connector ferrule until the tubing "clicks" into place.
It's that easy!
* No tools needed for installation.
* Unique locking fingers accommodate various chassis thicknesses.
* See below for Quick Specs.
* Suitable for a wide array of electrical applications:
---Commercial and Industrial HVAC Systems
---Motorized Equipment
---Enclosed Power Sources
---Garage Door Openers
---Major Appliances Molded of 6/6 nylon.
UL listed. File #E-121095
Flammability Rating--94V-2
Temperature Index--125°C |
"Quick Twist" Nylon Fastener/Connector Sweep-NPT Threaded |
|
Fits Conduit/Tubing Trade Size |
Part No. |
Description |
A |
B |
C |
D |
E |
|
Black |
Gray |
Clearance Hole. |
Max. Overall Height |
Max. Overall Length |
Thread Length |
Flange Dia. |
|
3/8 |
8502 |
8503 |
HFC 3/8-NPT-90-twist |
.875 |
22,2 |
1.754 |
44,6 |
2.749 |
69,8 |
.521 |
13,2 |
1.230 |
31,2 |
|
1/2 |
8507 |
8508 |
HFC 1/2-NPT-90 twist |
.875 |
22,2 |
1.754 |
44,6 |
2.749 |
69,8 |
.521 |
13,2 |
1.230 |
31,2 |
|
3/4 |
8512 |
8513 |
HFC 3/4-NPT-90 twist |
1.109 |
30,2 |
2.105 |
53,5 |
3.081 |
78,3 |
.530 |
13,5 |
1.500 |
38,1 |
|
-
Locknuts are NOT included.
-
Low cost electrical nylon fastener in four nylon fastener sizes (1/4", 3/8", 1/2", 3/4"). Approved for use with Heyco Flex II nylon tubing.
-
One-piece solution with smooth internal surfaces provides for easier wire routing, protection and installation.
-
All nylon construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
-
Easy, permanent nylon fastener assembly: the installer "twists" the nylon tubing over the ferrule until the nylon tubing "clicks" into place. It's that easy!
-
No tools needed for installation.
-
Unique nylon fastener locking nylon fingers accommodate various chassis thicknesses.
-
See below for Quick Specs.
-
Nylon fastener is suitable for a wide array of electrical applications:
-
---Commercial and Industrial HVAC Systems
-
---Motorized Equipment
-
---Enclosed Power Sources
-
---Garage Door Openers
-
---Major Appliances
-
Molded of 6/6 nylon.
-
UL listed. File #E-121095
-
Flammability Rating--94V-2
-
Temperature Index--125°C
|
